A novel acrylic orthodontic device for treatment of linguoverted mandibular canine teeth in small dogs.

Linguoverted mandibular canine teeth (LMC) is a common malocclusion in dogs. Several inclined bite-plane techniques using acrylic resin have been introduced to correct LMC in dogs. Although these techniques have suggested modifications to overcome shortcomings, there are still limitations; e.g., high technical sensitivity, as the viscous acrylic resin must still be fabricated in the oral cavity. The authors developed a novel method for small-breed dogs that uses a doughy acrylic resin form to achieve an easy intraoral design and extraoral fabrication. Eight small-breed dogs were presented to evaluate and treat malocclusion causing palatal trauma. First, a Class-1 malocclusion with linguoversion of the mandibular canine teeth (6 dogs with unilateral LMC and 2 dogs with bilateral) was diagnosed based on oral examination. Dogs were treated with the new method using a doughy acrylic resin form for 6 to 7 wk and had posttreatment follow-up 1 y after the procedure. All treated canine teeth were in correct positions 1 y after the appliances were removed. Key clinical message: The authors believe that the new method using a doughy acrylic resin form could be a good alternative for veterinarians to use when treating LMC.

Un nouveau dispositif orthodontique en acrylique pour le traitement des canines mandibulaires linguoverties chez les petits chiens. Les canines mandibulaires linguoverties (LMC) sont une malocclusion courante chez le chien. Plusieurs techniques de plan de morsure incliné utilisant de la résine acrylique ont été introduites pour corriger la LMC chez le chien. Bien que ces techniques aient suggéré des modifications pour surmonter les lacunes, elles présentent encore des limites; par exemple, une sensibilité technique élevée, car la résine acrylique visqueuse doit encore être fabriquée dans la cavité buccale. Les auteurs ont développé une nouvelle méthode pour les chiens de petite race qui utilise une forme pâteuse de résine acrylique pour obtenir une conception intra-orale et une fabrication extra-orale faciles. Huit chiens de petite race ont été présentés pour évaluer et traiter une malocclusion provoquant un traumatisme palatin. Tout d'abord, une malocclusion de classe 1 avec linguoversion des canines mandibulaires (6 chiens avec LMC unilatérale et 2 chiens avec bilatérale) a été diagnostiquée sur la base d'un examen oral. Les chiens ont été traités avec la nouvelle méthode en utilisant une forme pâteuse de résine acrylique pendant 6 à 7 semaines et ont fait l'objet d'un suivi post-traitement 1 an après la procédure. Toutes les canines traitées étaient dans la bonne position un an après le retrait des appareils.Message clinique clé:Les auteurs estiment que la nouvelle méthode utilisant une forme pâteuse de résine acrylique pourrait être une bonne alternative que les vétérinaires pourraient utiliser lors du traitement du LMC.(Traduit par Dr Serge Messier).

Orthognathic surgery: a significant tool for reassessment / La chirurgie orthognathique : un outil à ne pas oublier dans la réévaluation

Introduction: More than 15 years of experience in orthodontic-surgical collaboration has allowed the authors to identify some situations in which a new perspective is needed. Although it may seem easy to refer a patient to a maxillo-facial surgeon in cases of major dysmorphoses, this can lead to yet other dilemmas: a loss of results at the end of a developmental growth stage, an adult requesting a return to treatment after a camouflage orthodontic treatment or a non-cooperative child in an interceptive and preventive treatment phase. Then, a comprehensive process of reassessment becomes compulsory. Material and Method: In the form of an editorial, this article describes various cases encountered in the authors' practice. Discussion: The aim is not to point out the imperfections of our humanity, but simply to open our eyes to diagnostic elements that are missed, whether in the initial phase or during reassessment. Conclusion: As it is far from ideal to keep offering similar therapies that lead to the same pitfalls, it is time for a shift in the paradigm.

Introduction: Plus de 15 ans de recul en collaboration orthodontico-chirurgicale ont permis aux auteurs d'identifier un certain nombre de situations dans lesquelles un regard différent est devenu opportun. S'il est aisé d'orienter un patient vers un(e) chirurgien(ne) maxillo-facial(e) en cas de dysmorphoses majeures, les orthodontistes sont régulièrement confrontés à d'autres dilemmes : une perte de résultat en fin de croissance, un adulte demandeur d'une reprise après un traitement en compensation ou encore un enfant non-coopérant en phase interceptive. Une phase de réévaluation exhaustive devient alors nécessaire. Matériel et méthode: Sous la forme d'un éditorial, cet article expose différentes situations cliniques auxquelles les auteurs ont été confrontés lors de leur pratique. Discussion: Le propos n'est pas de pointer les imperfections de notre humanité mais seulement d'ouvrir les yeux sur des éléments diagnostiques qui échappent, que ce soit en phase initiale ou en réévaluation. Conclusion: Offrir une thérapeutique identique conduisant aux mêmes écueils n'est pas acceptable : il est temps de changer de paradigme.

Tooth-size discrepancy: a clinical necessity / Harmonie dento-dentaire : une nécessité clinique

Introduction: The subject of this article is the discovery of dento-dental disharmony (DDD) at the end of treatment. Lack of diagnosis is the source of this type of disappointment. Material and Method: The diagnosis of DDD is not easily accessible on clinical examination and the compensations it generates mask it, especially if it is associated with other dysmorphoses. The use of indices, the best-known of which is Bolton's, enables diagnosis with the setup, a pre-treatment model which also has many other prognostic interests. Results: Once DDD has been considered, it can be resolved by adapting dental volumes, either by subtraction or addition. Conclusion: Advances in computerized diagnosis with artificial intelligence are opening up new avenues for the systematic diagnosis of DDD.

Introduction: L'objectif de cet article est de présenter, à l'issue de la découverte d'une dysharmonie dento-dentaire (DDD) en fin de traitement orthodontique, les modalités de sa prise en charge. Le défaut de diagnostic initial est la source de ce type de déconvenue. Matériel et méthode: Le diagnostic de la DDD n'est pas facilement accessible à l'examen clinique, les compensations qu'elle génère la masquent, surtout si elle est associée à d'autres dysmorphoses. L'utilisation d'indices, dont le plus connu est celui de Bolton, permet le diagnostic avec le setup, maquette de prétraitement qui a aussi beaucoup d'autres intérêts pronostiques. Résultats: Une fois prise en compte, la DDD trouve sa solution par l'adaptation des volumes dentaires soit par soustraction amélaire soit par addition. Conclusion: Les avancées du diagnostic informatisé avec l'intelligence artificielle ouvrent des portes pour intégrer le diagnostic systématique de la DDD.

Aesthetic perception of patient in developmental age in interceptive orthodontic treatment.

AIM: Patients at development age show considerable attention to the shape of the face from both an aesthetic and relational point of view, to arouse interest from researchers. There are few studies related to profile analysis in patients of developmental age. Therefore, the objective of the present study was to analyse the importance of the aesthetic perception of the patient in development age in relation to the profile, before and after interceptive orthodontic treatment. MATERIALS: A sample of 25 patients who came to our observation for dentoskeletal malocclusions was considered. A questionnaire was proposed to each patient, before and after the interceptive orthodontic treatment (T0 and T1), to evaluate the aesthetic perception before and after the orthodontic treatment and its psychosocial impact. Profile analysis was performed using photographic documentation (at T0 and T1). The variables considered were the Ricketts line, the facial convexity angle, the nasolabial angle, and the labiomental angle. CONCLUSION: Interceptive orthodontic treatment has proven to be of valid clinical and psychological help. This result is confirmed by the complete aesthetic satisfaction of the patient in the frontal and latero-lateral planes.

Accuracy and reliability of magnetic resonance imaging in orthodontic diagnosis and treatment planning-a systematic review and meta-analysis.

BACKGROUND: Magnetic resonance imaging (MRI) is a non-ionizing imaging technique. Using MRI in dentistry may potentially lower the general radiation dose of the examined population, provided MRI can replace various radiation-based images. Furthermore, novel MRI imaging modalities for three-dimensional and two-dimensional cephalometrics have recently been developed for orthodontic diagnosis. OBJECTIVES: This systematic review aimed to determine the diagnostic accuracy and reliability of MRI in orthodontic diagnosis and treatment planning. SEARCH METHODS: An electronic search was conducted on 20 November 2022 in the following databases: PubMed, LILACS, Web of Science, EMBASE, Scopus, and Cochrane. The search was updated on 30 August 2023. Furthermore, a grey literature search was performed in Google Scholar and Open-Grey. SELECTION CRITERIA: This review included descriptive, observational, cohort studies, cross-sectional, case-control studies, and randomized/non-randomized trials related to the research question. The study excluded studies related to patients with syndromes, chronic diseases, craniofacial anomalies, or bone diseases. DATA COLLECTION AND ANALYSIS: The included studies were quality assessed using the "Joanna Brigg's Critical Appraisal Tool for diagnostic test accuracy". The GRADE approach for non-randomized studies was used for strength-of-evidence analysis. RESULTS: Eight of the 10 included studies compared MRI with either cone beam computed tomography or lateral cephalogram and found a high intra- and inter-rater agreement for landmark identification. The risk of bias was high in four studies, moderate in three, and low in three studies. Homogeneity was lacking among the included studies in terms of MRI imaging parameters and sample characteristics. This should be taken into consideration by future studies where uniformity with respect to these parameters may be considered. CONCLUSIONS: Despite dissimilarity and heterogeneity in the sample population and other methodological aspects, all the included studies concluded that MRI enjoyed considerable intra- and inter-examiner reliability and was comparable to current diagnostic standards in orthodontics. Furthermore, the studies agreed on the innovative potential of MRI in radiation-free diagnosis and treatment planning in orthodontics in the future. REGISTRATION: CRD number: CRD420223XXXXX.

Comparison of treatment effects between clear aligners and fixed appliances in patients treated with miniscrew-assisted molar distalization.

OBJECTIVES: The biomechanics in achieving molar distalization may differ between fixed appliances and clear aligners in the control of tooth movement. The objective of this study was to compare the treatment effects between clear aligners (CA) and fixed appliances (FA) in patients treated with miniscrew-assisted molar distalization. METHODS: The sample consisted of 46 subjects with mild-to-moderate crowding. A total of 22 patients treated with clear aligners (age, 25.66 ±â€…6.11 years old) and 24 patients treated with fixed appliances (age, 24.04 ±â€…4.95 years old) for miniscrew-assisted molar distalization were included in this study. The dental and skeletal changes were evaluated by the pre- and post-treatment lateral cephalograms. RESULTS: Significant changes were found with the vertical variables SN-OP angle (2.24 ±â€…3.22°, P < .05) and SN-MP angle (0.73 ±â€…1.15°, P < .05) for the FA group when compared with the CA group (SN-OP angle 0.41 ±â€…2.26° and SN-MP angle -0.21 ±â€…1.38°, P > .05). Both treatment groups achieved a 2-3 mm. molar distalization with significant intrusion of the upper molars. The CA group showed significantly less distal tipping of molars (U6^PP angle -2.29 ±â€…3.29° and L6^MP angle -2.92 ±â€…2.49°, P < .05) compared to the FA group (-5.24 ±â€…4.28° and -5.53 ±â€…5.03°, P < .05). In addition, significant retraction and lingual inclination of the upper and lower incisors were found in both groups. LIMITATIONS: The changes of tooth position were evaluated by 2D lateral cephalograms, not 3D measurements. CONCLUSIONS: Compared to fixed appliances, clear aligners seemed to have better control of vertical dimension and distal tipping of molars in patients treated with miniscrew-assisted molar distalization.

Clear aligner's adverse effects: A systematic review protocol.

With the growing popularity of clear aligners, more patients have chosen to use them instead of traditional orthodontic braces to correct their malocclusions. Clear aligners offer distinct advantages over conventional fixed braces, such as limited aesthetic impact, the convenience of easily removing them for meals, improved accessibility for brushing and flossing, and a treatment approach that avoids the use of metal, minimizing potential irritation to the cheeks and gums. Manufacturers point out a disadvantage that can be administered in this type of treatment. Still, to our knowledge, a comprehensive review of the published literature assessing the adverse/negative effects of clear aligners has not yet been conducted. A systematic review, with or without meta-analysis, will be performed. The inclusion criteria will be studies involving individuals using clear aligners and reporting potential adverse/negative effects during or after treatment. No restrictions about time or language will be applied. The studies screening will be conducted in two stages. Two independent reviewers will initially evaluate the title and abstract under the eligibility criteria. Subsequently, the same two reviewers will examine the articles' full text in-depth. The results will be synthesized in the form of a narrative description and incorporate a meta-analysis if justified. Furthermore, we will present details regarding the sample characteristics, intervention, study objectives, methodologies employed, and primary findings. This study aims to investigate the potential adverse effects and their frequency among orthodontic patients wearing clear aligners. Moreover, the outcomes of this review have the potential to illuminate specific inherent limitations of aligner therapy as a comprehensive orthodontic approach.

Innovations in Orthodontics: Skeletal Versus Dentoalveolar Expansion Utilizing Clear Aligners and TAD-Assisted Expanders.

Hypoplastic maxilla is a common skeletal anomaly that compromises function and esthetics. Beyond just a narrow-appearing smile, this abnormality presents significant restorative challenges in adult patients as it is often associated with crowding, compromised axial inclination of the teeth, lack of alveolar bone support, root proximity, and occlusal trauma.1 Recent research also confirms association of maxillary deficiency with nasal stenosis and a predisposition to compromised nasal airflow and pharyngeal collapse during sleep.2,3 Maxillary transverse skeletal deficiency is often but not always associated with posterior dental cross-bite. In most cases, maxillary posterior teeth are flared buccally and mandibular posterior teeth are excessively lingually inclined masking the underlying skeletal problem.4 Advances in 3D imaging in dentistry, namely ultra-low radiation cone-beam imaging technology, have significantly enhanced clinicians' ability to diagnose and subsequently treat a maxillary transverse deficiency.5.

Digital setup accuracy for moderate crowding correction with fixed orthodontic appliances: a prospective study.

OBJECTIVES: To evaluate the accuracy of a semi-automatic 3D digital setup process in predicting the orthodontic treatment outcome achieved by labial fixed appliances. SUBJECTS AND METHODS: Twenty-five adult patients (18 to 24 years old) with class I malocclusion and moderate crowding were prospectively enrolled and received treatment on both jaws through the straight-wire technique. Prior to treatment commencement, a semi-automatic digital setup simulating the predicted treatment outcome was performed for each patient through Orthoanalyzer software (3Shape®, Copenhagen, Denmark) to obtain the prediction model. This was compared to the final outcome model through 3D superimposition methods. Metric variables and inspection of color-coded distance maps were used to detect how accurately the digital setup predicts the actual treatment outcome. RESULTS: The mean absolute distances (MAD) between the superimposed dental arches of the predicted and the final models were: 0.77 ± 0.13 mm following superimposition on the palate, 0.52 ± 0.06 mm following superimposition on the maxillary dental arch, and 0.55 ± 0.15 mm following superimposition on the mandibular dental arch. The MAD at the palatal reference area was 0.09 ± 0.04 mm. Visualization of color-coded distance maps indicated that the digital setup accurately predicted the final teeth position in a few cases. Almost half of the cases had posteriorly wider upper and lower dental arches and palatally/lingually positioned or inclined anterior teeth, whereas the rest still showed errors within 2-3 mm, distributed over the entire dental arches with no distinct pattern. CONCLUSIONS: The accuracy of semi-automatic prediction of the labial fixed appliance treatment outcome in Class I cases with moderate crowding is not yet sufficient. While average measures showed deviations less than 1 mm, examination of individual color-coded distance maps revealed significant disparities between the simulated and the actual results.

Effects of eruption guidance appliance in the early treatment of Class III malocclusion.

OBJECTIVES: To evaluate the dentoskeletal effects and effectiveness of the eruption guidance appliance in Class III patients in the mixed dentition. MATERIALS AND METHODS: The experimental group comprised 22 patients with Class III malocclusion and anterior cross-bite (12 males, 10 females, mean age 7.63 ± 0.96 years) treated with the eruption guidance appliance over a mean period of 1.72 ± 0.48 years. The control group comprised 22 untreated subjects (12 males, 10 females, mean age 7.21 ± 0.60 years) with Class III malocclusion. Lateral cephalometric radiographs were obtained at pretreatment (T1) and posttreatment (T2). Intergroup comparisons were performed with Mann-Whitney and t-tests (P < .05). RESULTS: In the experimental and control groups, the anteroposterior relationship between the maxilla and mandible (ANB angle) remained stable during the treatment period (T1 to T2). The mandibular plane angle decreased in the experimental group and increased in the control group. In the experimental group, the lower anterior face height increase and maxillary molar vertical development were significantly smaller compared to controls. Positive overjet was achieved in 54% of the experimental group. CONCLUSIONS: The eruption guidance appliance produced no change in the skeletal anteroposterior relationship. The anterior cross-bite/edge-to-edge relationship was corrected in only about half of the treated subjects.

Study on decision-making for orthodontic treatment plans based on analytic hierarchy process.

BACKGROUND: Orthodontics is a common treatment for malocclusion and is essential for improving the oral health and aesthetics of patients. Currently, patients often rely on the clinical expertise and professional knowledge of doctors to select orthodontic programs. However, they lack their own objective and systematic evaluation methods to quantitatively compare different programs. Therefore, there is a need for a more comprehensive and quantitative approach to selecting orthodontic treatment plans, aiming to enhance their scientific validity and effectiveness. METHODS: In this study, a combination of the analytic hierarchy process (AHP) and semantic analysis was used to evaluate and compare different orthodontic treatment options. An AHP model and evaluation matrix were established through thorough research and semantic analysis of patient requirements. This model considered various treatment factors. Expert panels were invited to rate these factors using a 1-9 scale. The optimal solution was determined by ranking and comparing different orthodontic treatment plans using the geometric mean method to calculate the weights of each criterion. RESULTS: The research indicates a higher preference for invisible correction compared to other orthodontic solutions, with a weight score that is 0.3923 higher. Factors such as comfort and difficulty of cleaning have been given significant attention. CONCLUSION: The Analytic Hierarchy Process (AHP) method can be utilized to effectively develop orthodontic treatment plans, making the treatment process more objective, scientific, and personalized. The design of this study offers strong decision support for orthodontic treatment, potentially improving orthodontic treatment outcomes in clinical practice and ultimately enhancing oral health and patients' quality of life.

Influence of malocclusion on OHRQoL in adolescents in initial orthodontic treatment phase.

OBJECTIVES: Besides correcting malocclusions, another main objective of orthodontic treatment is to improve patients' oral health-related quality of life (OHRQoL). This study aimed to assess changes in OHRQoL of children within the first six months of orthodontic therapy with fixed orthodontic appliances. METHODS: 85 patients aged 11 to 14 years requiring fixed orthodontic appliance therapy were included. The children completed the German version of the Child Perceptions Questionnaire (CPQ-G-11-14) before (T0), 1 month (T1) and 6 months (T2) after the start of orthodontic treatment. The type of malocclusion was categorized according to the Index of Orthodontic Treatment Need (IOTN). RESULTS: The initial type of malocclusion affected the children's OHRQoL, whereas gender and age did not. The IOTN dental health component (DHC) had a significant impact on the CPQ score (median CPQ of 15.00 for the group DHC 4 vs. 22.50 for DHC 5, p = 0.032). The onset of orthodontic treatment initially affected the CPQ domains "Oral symptoms" and "Functional limitations, with a change versus baseline of 2.00 (p = 0.001), but improved again after 6 months. Regression analysis demonstrated that children with an IOTN DHC 5 malocclusion experienced a greater impact on their ORHQoL, as indicated by a CPQ score 7.35 points higher than that of children with an IOTN DHC 4 malocclusion (p = 0.015). CONCLUSIONS: At the beginning of orthodontic treatment, the OHRQoL slightly worsens, probably due to the discomfort and appearance of the appliances. However, 6 months after the start of orthodontic treatment, OHRQoL improved again in patients with severe malocclusion (IOTN 4 and 5), and approached baseline values. CLINICAL RELEVANCE: The results help the clinician to better understand specific aspects of oral health that may be affected by different malocclusions, thereby improving the child's satisfaction and overall quality of life.

Infraocclusion in the Primary and Permanent Dentition-A Narrative Review.

The gradual movement of a tooth away from the occlusal plane is called infraocclusion or reinclusion. Reincluded teeth are most often deciduous molars, and permanent teeth are less frequently affected. Depending on the level of the infraocclusion, the severity of the disorder is classified as mild, moderate, or severe. The etiology of the phenomenon is not fully known. Tooth submerging can lead to serious complications, such as abnormal position of adjacent teeth, displacement of the bud of the permanent successor, shortening of the dental arch, or developmental disturbances of alveolar process. Early diagnosis of the tooth infraocclusion and regular monitoring of its progression help to avoid serious permanent sequelae. The treatment of reinclusion often involves only observation. However, in some cases, the therapeutic procedure requires interdisciplinary treatment by specialists from various fields of dentistry. This study presents current methods of diagnosis and treatment of patients with submerged teeth.

Measuring Maxillary Posterior Tooth Movement: A Model Assessment using Palatal and Dental Superimposition.

Since the introduction of Invisalign by Align Technology, Inc. in 1999, questions and debates have persisted regarding the precision of Invisalign (clear aligner) therapy, particularly when compared to the use of traditional fixed appliances. This becomes particularly significant in cases involving anteroposterior, vertical, and transverse corrections, where precise comparisons are of paramount importance. To address these inquiries, this study introduces a meticulously devised protocol, placing a primary emphasis on digitally superimposing the movement of maxillary posterior teeth to facilitate accurate analysis. The sample included 25 patients who had completed their first series of Invisalign (clear) aligners. Four maxillary digital models (pre-treatment, post-treatment, ClinCheck-initial, and final models) were digitally superimposed using the palate rugae and dentitions as stable references. A software combination was used for model superimposition and tooth segmentation. Transformation matrices then expressed the differences between the achieved and predicted tooth positions. Thresholds for clinically relevant differences were at ±0.25 mm for linear displacement and ±2° for rotation. Differences were assessed using Hotelling's T-squared tests with Bonferroni correction. The mean differences in rotation (2.036° ± 4.217°) and torque (-2.913° ± 3.263°) were significant statistically and clinically, with p-values of 0.023 and 0.0003 respectively. De-rotation of premolars and torque control for all posterior teeth were less predictable. All mean differences for the linear measurements were statistically and clinically insignificant, except that the first molars seemed slightly (0.256 mm) more intruded than their predicted position. The clear aligner system appears to meet its prediction for most translational tooth movements and mesial-distal tipping in maxillary posterior teeth for non-extraction cases with mild to moderate malocclusions.

Orthodontic treatment demand for fixed treatment and aligners among young adults in middle Europe and South America - a questionnaire study.

BACKGROUND: Patients experiencing any malocclusion, may desire for treatment. However, there is no scientific information orthodontic treatment demand and the knowledge of young adults about orthodontic treatment. The aim of the study was to assess orthodontic treatment demand in young adults from Poland and Chile, their previous orthodontic experience and their knowledge on fixed and aligner orthodontic treatment. METHODS: The target group comprised people aged 18-30. The sample size was estimated as above 400 for each country. The survey was carried out in Polish and Spanish within 3 months and consisted of 25 questions delivered via social media. Comparisons were made between countries, age subgroups and gender. RESULTS: The response rate was 1,99%, what stands for 1092 responses, 670 from Chile and 422 from Poland, respectively. The percentage of young adults who were already treated was 42,9% in Poland and 25,0% in Chile. The ones planning to have orthodontic treatment within a year counted for 11,8% in Poland and 5,3% in Chile. Most young adults who want to be treated (20,6%) rely on doctor's recommendation on type of appliance while 14,7% of all respondents are interested solely in aligners. Most respondents have heard about aligners (58%). Direct provider-to-customer service without a doctor is not acceptable, neither in Poland (85,1%) nor in Chile (64,8%). Most young adults provided incorrect answers referring various aspects of aligner treatment. CONCLUSIONS: In both countries, patients demand to be treated and monitored by the orthodontist. A high percentage of patients want to be treated exclusively with aligners. Direct-to-consumer orthodontics does not seem attractive to patients. Young adults do not have adequate knowledge referring to aligner treatment. Many people want to be treated despite a previous orthodontic treatment.

A fully digital low-cost workflow of a multidisciplinary minimally invasive treatment: step-by-step from function to esthetics.

This clinical case outlines a comprehensive digital workflow for a minimally invasive multidisciplinary treatment. The process utilizes one open-source software for digital wax-up and one low-cost software to address esthetic concerns related to teeth misalignment. The patient's function was stabilized with a digitally made occlusal splint. The application of the described digital workflow technique, incorporating open-source, low-cost, and closed software, played a pivotal role in attaining a straightforward and predictable outcome with minimally invasive treatment. Furthermore, the continual evolution of technology contributes to the growing precision of dental procedures. The presented digital workflow helped formulate a predictable treatment plan, replicate a diagnostic digital wax-up, and achieve precise teeth alignment. This approach satisfactorily addressed the patient's esthetic concerns, providing an outstanding approximation of the definitive result.

Effects of clear aligners on the vertical position of the molar teeth and the vertical and sagittal relationships of the face: a preliminary retrospective before-after clinical trial.

INTRODUCTION: Despite the popularity of clear aligners, their predictability has not been assessed adequately. Moreover, no study has investigated their effects on numerous dentomaxillary variables. Therefore, this study was conducted for the first time, assessing several new or controversial items. The aim of the study was to evaluate the effects of clear aligners on the vertical position of the molar teeth and the vertical and sagittal relationships of the face. METHODS: This preliminary retrospective before-after non-randomized clinical trial was performed on 168 observations of 84 patients (33.60±9.28 years, 54 females) treated with 0.75mm Invisalign appliances. Pretreatment and posttreatment values were measured for: mandibular plane angle, occlusal plane angle, Y-Axis, ANB, facial angle, lower anterior facial height, overbite, and the distances of the molars from the palate and mandibular plane were measured. The alterations in parameters caused by treatment (delta values) were calculated for each measurement. Effects of treatment and some parameters on delta values were analyzed statistically (α=0.05). RESULTS: Mean±SD of ΔMP-FH, ΔOP-FH, ΔY-Axis, ΔLAFH, ΔNPog-FH, ΔANB, ΔOverbite, ΔSNB, Δ6-PP, Δ7-PP, Δ6-MP, and Δ7-MP were respectively 0.11±1.61, 0.80±1.56, 0.15±1.18, 0.07±0.91, -0.22±1.25, 0.03±0.62, 0.04±1.15, -0.06±1.14, -0.36±0.94, -0.32±1.14, 0.19±0.96, 0.18±1.10. Only the alterations in OP-FH, 6-PP, and 7-PP were significant (P≤0.011). Age, sex, treatment duration, or pretreatment mandibular plane angle were not correlated with any delta values. However, the pretreatment occlusal plane angle was negatively correlated with ΔOP-FH and ΔY-Axis. Crowding was correlated negatively with ΔOP-FH and ΔY-Axis and positively with ΔNPog-FH. Overjet was negatively correlated with ΔANB and ΔOverbite (P≤0.035). CONCLUSIONS: Invisalign intruded first/second maxillary molars and increased the occlusal plane angle. Age, sex, and treatment duration were not correlated with post-treatment anatomic alterations.

Effect of clear aligner type on maxillary full-arch intrusion: 3D analysis using finite element method.

BACKGROUND: Vertical maxillary excess (VME) is one of the most common reasons for seeking orthodontic treatment. Total intrusion with aligners is a promising alternative to surgery in some cases. Considering the elastic deformation of aligners, this study aimed to evaluate the possible desirable and undesirable teeth displacements during full maxillary arch intrusion using clear aligners and temporary anchorage devices (TADs). METHODS: The maxillary arch and clear aligners were modeled in SolidWorks. Four aligner brands including Leon, Duran, Duran Plus, and Essix Plus were selected based on their material properties. Anterior and posterior intrusion forces of 80 and 300 g were applied from attachments between the canines and first premolars and between the first and second molars, respectively. Vertical and anteroposterior tooth displacements were determined. RESULTS: The greatest intrusion was recorded at the buccal of the second molar, followed by the first molar. The lowest value was measured at the palatal of the molars with all aligners except Duran, which indicated minimal intrusion in the central incisor. All teeth were mesially displaced at the incisal/occlusal except incisors that moved distally. All apices showed distal movement. CONCLUSIONS: Total intrusion using clear aligners may be accompanied by other tooth movements, including buccal tipping and mesial-in rotation of the molars, retrusion of incisors, and mesial movement of other teeth.

Orthodontic camouflage treatment for a patient with bilateral cleft lip and palate, bilateral crossbite, and microdontic maxillary lateral incisors.

Cleft lip and palate is a congenital craniofacial anomaly that affects the lip and oral cavity. The management and orthodontic treatment of this anomaly is important but challenging. This article reports the successful treatment of a patient with bilateral cleft lip and palate, Class III malocclusion, bilateral crossbite, crowding and microdontic maxillary lateral incisors. One mandible incisor was extracted, and three miniscrew anchorages were utilized to distalize the maxillary left dental arch and retract the mandibular arch. After treatment, ideal occlusion and a better profile were established, and long-term stability was confirmed by a 4-year follow-up. This article represents a successful attempt of orthodontic camouflage treatment of severe dentofacial discrepancy, as an important part of the series treatment of cleft lip and palate, to provide some insight into the clinical field.